Вопрос по mySQL

Но чудес же не бывает. Скорее всего, установился дефолтный шаблон настроек Апача, который запрещает чтение файлов htaccess.

Да скорее всего, так же и будет "не работать", если настройки сервера не поправить.

Возможно, есть ещё дополнительный конфигурационный файл. Для конкретного пользователя.

Да, может быть. Я в панелях не силен, да и виртуализации обычно не арендую, только настоящие железки без панелек ={

Вот данные:

/etc/apache2/apache2.conf

# This is the main Apache server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See http://httpd.apache.org/docs/2.4/ for detailed information about

# the directives and /usr/share/doc/apache2/README.Debian about Debian specific

# hints.

#

#

# Summary of how the Apache 2 configuration works in Debian:

# The Apache 2 web server configuration in Debian is quite different to

# upstream's suggested way to configure the web server. This is because Debian's

# default Apache2 installation attempts to make adding and removing modules,

# virtual hosts, and extra configuration directives as flexible as possible, in

# order to make automating the changes and administering the server as easy as

# possible.

# It is split into several files forming the configuration hierarchy outlined

# below, all located in the /etc/apache2/ directory:

#

# /etc/apache2/

# |-- apache2.conf

# | `--  ports.conf

# |-- mods-enabled

# | |-- *.load

# | `-- *.conf

# |-- conf-enabled

# | `-- *.conf

# `-- sites-enabled

# `-- *.conf

#

#

# * apache2.conf is the main configuration file (this file). It puts the pieces

#   together by including all remaining configuration files when starting up the

#   web server.

#

# * ports.conf is always included from the main configuration file. It is

#   supposed to determine listening ports for incoming connections which can be

#   customized anytime.

#

# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/

#   directories contain particular configuration snippets which manage modules,

#   global configuration fragments, or virtual host configurations,

#   respectively.

#

#   They are activated by symlinking available configuration files from their

#   respective *-available/ counterparts. These should be managed by using our

#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See

#   their respective man pages for detailed information.

#

# * The binary is called apache2. Due to the use of environment variables, in

#   the default configuration, apache2 needs to be started/stopped with

#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not

#   work with the default configuration.

# Global configuration

#

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# NOTE!  If you intend to place this on an NFS (or otherwise network)

# mounted filesystem then please read the Mutex documentation (available

# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);

# you will save yourself a lot of trouble.

#

# Do NOT add a slash at the end of the directory path.

#

#ServerRoot "/etc/apache2"

#

# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.

#

#Mutex file:${APACHE_LOCK_DIR} default

#

# The directory where shm and other runtime files will be stored.

#

DefaultRuntimeDir ${APACHE_RUN_DIR}

#

# PidFile: The file in which the server should record its process

# identification number when it starts.

# This needs to be set in /etc/apache2/envvars

#

PidFile ${APACHE_PID_FILE}

#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300

#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On

#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100

#

# KeepAliveTimeout: Number of seconds to wait for the next request from the

# same client on the same connection.

#

KeepAliveTimeout 5

# These need to be set in /etc/apache2/envvars

User ${APACHE_RUN_USER}

Group ${APACHE_RUN_GROUP}

#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups Off

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog ${APACHE_LOG_DIR}/error.log

#

# LogLevel: Control the severity of messages logged to the error_log.

# Available values: trace8, ..., trace1, debug, info, notice, warn,

# error, crit, alert, emerg.

# It is also possible to configure the log level for particular modules, e.g.

# "LogLevel info ssl:warn"

#

LogLevel warn

# Include module configuration:

IncludeOptional mods-enabled/*.load

IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on

Include ports.conf

# Sets the default security model of the Apache2 HTTPD server. It does

# not allow access to the root filesystem outside of /usr/share and /var/www.

# The former is used by web applications packaged in Debian,

# the latter may be used for local directories served by the web server. If

# your system is serving content from a sub-directory in /srv you must allow

# access here, or in any related virtual host.

<Directory />

Options FollowSymLinks

AllowOverride None

Require all denied

</Directory>

<Directory /usr/share>

AllowOverride None

Require all granted

</Directory>

<Directory /var/www/>

Options Indexes FollowSymLinks

AllowOverride None

Require all granted

</Directory>

#<Directory /srv/>

# Options Indexes FollowSymLinks

# AllowOverride None

# Require all granted

#</Directory>

# AccessFileName: The name of the file to look for in each directory

# for additional configuration directives.  See also the AllowOverride

# directive.

#

AccessFileName .htaccess

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<FilesMatch "^\.ht">

Require all denied

</FilesMatch>

#

# The following directives define some format nicknames for use with

# a CustomLog directive.

#

# These deviate from the Common Log Format definitions in that they use %O

# (the actual bytes sent including headers) instead of %b (the size of the

# requested file), because the latter makes it impossible to detect partial

# requests.

#

# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.

# Use mod_remoteip instead.

#

LogFormat "%v:%p %a %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined

LogFormat "%a %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined

LogFormat "%a %l %u %t \"%r\" %>s %O" common

LogFormat "%{Referer}i -> %U" referer

LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,

# see README.Debian for details.

# Include generic snippets of statements

IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:

IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

Include conf.d/

Listen 127.0.0.1:8080

IncludeOptional vhosts-default/*.conf

IncludeOptional vhosts/*/*.conf

Тогда смотрите мой ответ выше по поводу изменения allow override в директории <Directory /var/www/> на значение All. После этого ребутните апач командой service apache2 restart.

<Directory /var/www/>

Получается, что неправильная конфигурация, судя по приведённому файлу. См. коммент выше. Не должно быть  AllowOverride None для директории с сайтами, если хотите, чтобы апач читал файлы htaccess. Вам об этом несколько раз написали.

Если это хестия панель, то там сайты хранятся в папке /home/user/ какие www?! Какие  AllowOverride ?

Вы какие-то теории строите. Этот конфиг можно пустой оставлять т.к. вся суть здесь:

Надо логи ковырять! НО, если уже взяли новый с ISP... да не плевать ли что-то там уже? Перекидывайте сайт и работайте дальше. Я в любом случаи хестию панель не рекомендую.

Ща поглядим

Я сейчас переношу сайт на новый созданный сервер, там станет ясно.