Cent: Если карта не активирована, то она может лежать у вас в таком состоянии 2 года, то есть срок действия карты.
Если карта активирована, то каждый месяц вы будете платить за обслуживание 6 долл, поэтому я вам советую карту заблокировать.
Уточните, что в данном случае значит "активирована"? Вот лежит карта в конверте, я её не пополнял, никак не использовал. Она активирована или нет?
smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE amd64] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11 family
Device Model: ST31500341AS
Serial Number: 9VS46HJK
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Feb 25 11:20:59 2011 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Error Log Version: 1
ATA Error Count: 7 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 occurred at disk power-on lifetime: 2054 hours (85 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Error 6 occurred at disk power-on lifetime: 1568 hours (65 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Error 5 occurred at disk power-on lifetime: 1568 hours (65 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Error 4 occurred at disk power-on lifetime: 1447 hours (60 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Error 3 occurred at disk power-on lifetime: 1447 hours (60 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Суд Великобритании принял решение об экстрадиции основателя WikiLeaks Джулиана Ассанжа в Швецию, где он должен предстать перед следственными органами и ответить на вопросы, связанные с делом о сексуальных домогательствах
Puga, отправьте на почту адрес страницы вашего сайта, на которой можно проверить.
А1 возобновил прием Webmoney, теперь скрипт аукциона можно купить за Webmoney
Если карта не активирована, то она может лежать у вас в таком состоянии 2 года, то есть срок действия карты.
Если карта активирована, то каждый месяц вы будете платить за обслуживание 6 долл, поэтому я вам советую карту заблокировать.
Уточните, что в данном случае значит "активирована"? Вот лежит карта в конверте, я её не пополнял, никак не использовал. Она активирована или нет?
Там наверно теги нужны?
Да, обычные Html-тэги. Можно по-старинке
а можно через style
акой вопрос как мне написать свои слова, чтобы они были там где у вас на демо сайте слова:
Панель управления - Основные настройки - Текст объявления
мне надо вот что сделать
Не пробовали "купить" ("заплатить деньги")? Стоит совсем недорого, http://www.ritlabs.com/ru/products/thebat/order_on.php
Евгений пожалуйста поправь глюки с Робокассой, не только у меня одного глюки с оплатой. Посмотри на своем сайте комментарии!
Проверю.
З.Ы. Я не Евгений :)
Вот что говорит smartctl -a /dev/ad8
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11 family
Device Model: ST31500341AS
Serial Number: 9VS46HJK
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Feb 25 11:20:59 2011 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 099 006 Pre-fail Always - 173325211
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 6
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 7
7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always - 11585888
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2077
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 6
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 091 091 000 Old_age Always - 9
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2
190 Airflow_Temperature_Cel 0x0022 073 061 045 Old_age Always - 27 (Min/Max 25/28)
194 Temperature_Celsius 0x0022 027 040 000 Old_age Always - 27 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 048 023 000 Old_age Always - 173325211
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 144581484087325
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2750909728
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3116739818
SMART Error Log Version: 1
ATA Error Count: 7 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 occurred at disk power-on lifetime: 2054 hours (85 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff 4f 00 04:43:02.112 READ DMA EXT
25 00 00 ff ff ff 4f 00 04:43:02.104 READ DMA EXT
25 00 00 ff ff ff 4f 00 04:43:01.569 READ DMA EXT
25 00 00 ff ff ff 4f 00 04:43:01.561 READ DMA EXT
25 00 00 ff ff ff 4f 00 04:42:57.111 READ DMA EXT
Error 6 occurred at disk power-on lifetime: 1568 hours (65 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff 4f 00 38d+04:40:45.399 READ DMA EXT
25 00 40 ff ff ff 4f 00 38d+04:40:45.345 READ DMA EXT
25 00 00 ff ff ff 4f 00 38d+04:40:35.879 READ DMA EXT
25 00 00 ff ff ff 4f 00 38d+04:40:35.865 READ DMA EXT
25 00 00 ff ff ff 4f 00 38d+04:40:35.853 READ DMA EXT
Error 5 occurred at disk power-on lifetime: 1568 hours (65 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff 4f 00 38d+04:40:35.879 READ DMA EXT
25 00 00 ff ff ff 4f 00 38d+04:40:35.865 READ DMA EXT
25 00 00 ff ff ff 4f 00 38d+04:40:35.853 READ DMA EXT
25 00 00 ff ff ff 4f 00 38d+04:40:35.840 READ DMA EXT
25 00 00 ff ff ff 4f 00 38d+04:40:35.829 READ DMA EXT
Error 4 occurred at disk power-on lifetime: 1447 hours (60 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 ff ff ff 4f 00 33d+03:57:04.936 READ DMA EXT
25 00 00 ff ff ff 4f 00 33d+03:57:00.555 READ DMA EXT
25 00 20 ff ff ff 4f 00 33d+03:57:00.480 READ DMA EXT
25 00 00 ff ff ff 4f 00 33d+03:56:56.524 READ DMA EXT
25 00 20 ff ff ff 4f 00 33d+03:56:56.441 READ DMA EXT
Error 3 occurred at disk power-on lifetime: 1447 hours (60 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 ff ff ff 4f 00 33d+03:57:00.555 READ DMA EXT
25 00 20 ff ff ff 4f 00 33d+03:57:00.480 READ DMA EXT
25 00 00 ff ff ff 4f 00 33d+03:56:56.524 READ DMA EXT
25 00 20 ff ff ff 4f 00 33d+03:56:56.441 READ DMA EXT
25 00 00 ff ff ff 4f 00 33d+03:56:52.184 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Какие-то ошибки ест. Не могу понять, критичные они или нет?
Для начала smart посмотрет
Как это сделать на freebsd?
Возможно ли на ПК запустить
Не понятно, под какую платформу программы. Если Java, то можно запустить в
эмуляторе Java.
http://www.vedomosti.ru/politics/news/1217569/britanskij_sud_nachal_zachityvat_reshenie_po_delu_ob