Непонятки в log/messages

iBBi:
Быстро делаем бекап!

OS ubuntu? какое ядро?

maxi1965:
А по-конкретнее?

CentOS 5

iBBi:
Винт хочет чтобы его вынесли ногами вперед. Или контроллер, драйвера.

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD321KJ
Serial Number: S0MQJDWQ180956
Firmware Version: CP100-12
User Capacity: 320,072,933,376 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Not recognized. Minor revision code: 0x52
Local Time is: Tue May 27 18:02:38 2008 CEST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00)Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0)The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (5767) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003)Saves SMART data before entering
power-saving mode.

Supports SMART auto save timer.
Error logging capability: (0x01)Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 99) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 5504
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 841
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 216707134
187 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
190 Unknown_Attribute 0x0022 063 063 000 Old_age Always - 37
194 Temperature_Celsius 0x0022 127 124 000 Old_age Always - 37
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 216707134
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay

Boris A Dolgov:
Ага, одна половина значений - Pre-fail, вторая - Old_age.
Быстро бекапы, пока не поздно.

Boris A Dolgov:
так pre-fail он на то и pre-fail, а не fail :)
как я понимаю,
badblocks /dev/sda1

Boris A Dolgov добавил 27.05.2008 в 20:59
Сорри за панику, не туда посмотрел :(
pre-fail и old-age показывают смысл параметра а не значение.
Как я вижу, сейчас сбоев нет.
Можно попробовать попросить дц подергать кабель :)

Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 5504
Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 215898044
Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 215898044

exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0