HDD power_on_hours ~258 лет

Кто что думает по этому поводу? винту пездец?

9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 2506551

cyber2 добавил 22.10.2009 в 03:07

полный смарт

# smartctl --all -F samsung2 /dev/ad0

smartctl version 5.38 [i386-portbld-freebsd6.2] Copyright (C) 2002-8 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===

Device Model: SAMSUNG SV0813H

Serial Number: XXXXXXXXX

Firmware Version: RJ100-15

User Capacity: 80,060,424,192 bytes

Device is: In smartctl database [for details use: -P show]

ATA Version is: 6

ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1

Local Time is: Wed Oct 21 19:02:56 2009 EDT

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x00) Offline data collection activity

was never started.

Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: (2880) seconds.

Offline data collection

capabilities: (0x1b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

No Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

No General Purpose Logging support.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 48) minutes.

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0

4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 0

5 Reallocated_Sector_Ct 0x0033 253 253 009 Pre-fail Always - 0

7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0

8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0

9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 2506551

12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 0

194 Temperature_Celsius 0x0022 180 180 000 Old_age Always - 244

197 Current_Pending_Sector 0x0033 253 253 009 Pre-fail Always - 0

198 Offline_Uncorrectable 0x0031 253 253 009 Pre-fail Offline - 0

199 UDMA_CRC_Error_Count 0x000a 253 253 000 Old_age Always - 0

200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0

201 Soft_Read_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0

SMART Error Log Version: 1

ATA Error Count: 79 (device log contains only the most recent five errors)

CR = Command Register [HEX]

FR = Features Register [HEX]

SC = Sector Count Register [HEX]

SN = Sector Number Register [HEX]

CL = Cylinder Low Register [HEX]

CH = Cylinder High Register [HEX]

DH = Device/Head Register [HEX]

DC = Device Command Register [HEX]

ER = Error register [HEX]

ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 79 occurred at disk power-on lifetime: 38737 hours (1614 days + 1 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

04 51 00 00 c2 4f e0 Error: ABRT

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

b0 da 00 00 c2 4f e0 00 42d+02:04:06.526 SMART RETURN STATUS

ec 00 00 00 00 00 e0 00 46d+17:50:37.566 IDENTIFY DEVICE

ca 00 20 ef 7d 19 e0 00 15d+15:54:59.966 WRITE DMA

ca 00 20 cf 7d 19 e0 00 15d+15:54:59.966 WRITE DMA

ca 00 20 af 7d 19 e0 00 15d+15:54:59.966 WRITE DMA

Error 78 occurred at disk power-on lifetime: 35894 hours (1495 days + 14 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

04 51 05 01 00 00 a0 Error: ABRT

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

a1 00 05 01 00 00 a0 00 21d+18:22:35.520 IDENTIFY PACKET DEVICE

b0 d9 f1 00 c2 4f a0 00 17d+02:36:04.480 SMART DISABLE OPERATIONS

b0 d2 f1 00 c2 4f a0 00 17d+02:36:04.480 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE

b0 d8 ff 00 c2 4f a0 00 17d+02:36:04.480 SMART ENABLE OPERATIONS

91 00 ff 00 00 00 af 00 17d+02:36:04.480 INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 77 occurred at disk power-on lifetime: 35894 hours (1495 days + 14 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

04 51 05 01 00 00 a0 Error: ABRT

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

a1 00 05 01 00 00 a0 00 21d+18:22:35.520 IDENTIFY PACKET DEVICE

b0 d9 f1 00 c2 4f a0 00 29d+15:04:59.646 SMART DISABLE OPERATIONS

b0 d2 f1 00 c2 4f a0 00 29d+15:04:59.646 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE

b0 d8 ff 00 c2 4f a0 00 29d+15:04:59.646 SMART ENABLE OPERATIONS

91 00 ff 00 00 00 af 00 29d+15:04:59.646 INITIALIZE DEVICE PARAMETERS [OBS-6]

Error 76 occurred at disk power-on lifetime: 35894 hours (1495 days + 14 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

04 51 05 01 00 00 a0 Error: ABRT

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

a1 00 05 01 00 00 a0 00 29d+15:04:59.646 IDENTIFY PACKET DEVICE

00 00 01 01 00 00 00 00 26d+11:48:28.286 NOP [Abort queued commands]

e7 00 00 00 00 00 e0 00 31d+03:34:59.326 FLUSH CACHE

ca 00 04 bf 00 00 e0 00 31d+03:34:59.326 WRITE DMA

ca 00 04 3f 00 21 e0 00 31d+03:34:59.326 WRITE DMA

Error 75 occurred at disk power-on lifetime: 50224 hours (2092 days + 16 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

04 51 05 01 00 00 a0 Error: ABRT

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

a1 00 05 01 00 00 a0 00 31d+01:55:37.600 IDENTIFY PACKET DEVICE

a1 00 01 01 00 00 a0 00 14d+00:59:51.680 IDENTIFY PACKET DEVICE

00 00 01 01 00 00 00 00 6d+05:56:49.280 NOP [Abort queued commands]

e7 00 00 00 00 00 e0 00 10d+21:43:20.320 FLUSH CACHE

ca 00 04 bf 00 00 e0 00 10d+21:43:20.320 WRITE DMA

SMART Self-test log structure revision number 1

No self-tests have been logged. [To run self-tests, use: smartctl -t]

Device does not support Selective Self Tests/Logging